Transcription

SQUARE D Multi-Link StructuredWiring SystemClass 1400Schneider Electric Brands

Table of ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Wiring Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Recommended Pre-wire Schemes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Installing and Terminating the Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Recommended Product Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Enclosures and Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19General Information and Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Television/Telephone Combination Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25General Information and Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Voice and Data Network Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Expanding the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Audio Distribution Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Video Distribution Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33General Information and Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Satellite Multi-Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41General Information and Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Modulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45General Information and Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Video Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55General Information and Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59304/03 2001–2003 Schneider Electric All Rights Reserved

Table of ContentsVideo Wall Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61General Information and Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61IR Target and Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63General Information and Application Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69General Troubleshooting Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Radio Frequency Troubleshooting Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Modulator Troubleshooting for Cameras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Structured Wiring Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Model Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 794 2001–2003 Schneider Electric All Rights Reserved04/03

IntroductionProduct DescriptionPRODUCT DESCRIPTIONINTRODUCTIONThe Square D Multi-Link Structured Wiring System represents the nextgeneration of products for home networks. The Square D Multi-LinkStructured Wiring System offers a complete range of products that integratevoice, data, and video applications for a complete system solution.Square D warrants the product to be free from defects in materials andworkmanship for eighteen months from the date of invoice from Square D orits authorized sales channel.The devices are UL Listed for use in US markets and CUL Listed for use inCanada.APPLICATION DATAThe structured wiring modules are wired using Category 5 (CAT-5) orCategory 5E (CAT-5E) cable and RG-6 coaxial cables.All structured wiring modules are easily installed into enclosures, alsosupplied by Square D.Category 5 and 5E CableCategory 5 and 5E cables are made up of four unshielded twisted pairs. Eachpair is color coded for application identification. CAT-5 or CAT-5E cables arerecommended for telecommunications, camera, and data applications.CAT-5 and CAT-5E cables will support standard analog telephone, digitaltelephone, and data. Category 5 and Category 5E cables meet TIA/EIA–586Aand 570 standards for data applications such as high-speed Internet access.The cables have a bandwidth of 100 MHz and data transmission speeds up to100 Mbps. CAT-5 and CAT-5E cable installations provide connections forimmediate and future computer, video, and telephone upgrades, thus protectingthe long-term resale value of the home.NOTE: Category 5/5E cables should not be routed parallel to the AC powerwiring unless 14 in. (356 mm) of separation or greater is provided. CrossCategory 5/5E cables over AC power wires at 90 .Aluminum Foil ShieldingFoam PolyethyleneDielectric CoreRG-6 Coaxial CableF-ConnectorCopper Clad Center ConductorPVC Jacket60% AluminumBraidRG-6 QuadRG-6 coaxial cable has an 18 gauge copper coated steel center conductor,polyethylene dielectric core, aluminum braid, and PVC jacket. Standard “F”connectors are used for video, audio, and television equipment connections.Under extreme noise conditions, such as near a radio or television transmitter,use quad-shielded RG-6 cable.NOTES: RG-6 coaxial cable should not be routed parallel to AC power wiringunless 14 in. (356 mm) of separation or greater is provided. Cross RG-6coaxial cable over AC power wires at 90 .When bending coaxial cable, a radius of no less than four times the outsidediameter of the cable should be maintained. For RG-6 coaxial cable, thebending radius should be 1 - 1 1/2 inches or greater.04/03 2001–2003 Schneider Electric All Rights Reserved5Section 1–Introductionwww.squared.com/multilink

Section inkApplication DataInstalling Modules into EnclosureAll structured wiring modules are easily installed into enclosures, also suppliedby Square D. Using the hook on the back of the module, hang the module on theenclosure grid, swing the module into place, and push the button on the right sideof the module to lock the module into the enclosure grid.HookEnclosure gridPush button tolock moduleinto place6Telephone Service HubSquare D model SDM412PJTelephonesRJ-31XR4TR3TR2TR 1TExpansion 2001–2003 Schneider Electric All Rights Reserved04/03

www.squared.com/multilinkWiring GuideRecommended Pre-wire SchemesWIRING GUIDEStructured wiring cables run from the wall boxes in the various rooms of the house directly to the structuredwiring enclosure (called home run wiring). Two types of wire are used for communication and entertainment:CAT-5 or CAT-5E, made up of 4-UTP (unshielded twisted pairs), and RG-6 coaxial. CAT-5 or CAT-5E 4-UTPwires handle voice and data for up to four telephone lines. CAT-5 or CAT-5E wires can have two to fourunshielded twisted pairs. Square D recommends four pairs. RG-6 coaxial wires handle television (antennaor cable), satellite dish, cable modem, or AV modulator signals.Refer to the following table for the recommended wiring schemes. These wires run from the enclosure to thelocations indicated in the table.Recommended Pre-wire SchemesTypical RoomMedia CenterWire TypeGoodPhone/TVCAT–51RG–61Wire e /AVModulatorsPhone/TV/Ethernet/Satellite Receiver/ACModulatorsPhone/TV/Ethernet/Satellite Receiver/ACModulators/Hi–speedDataHome OfficeWire TypeQuantityCAT–51RG–63Wire TypeQuantityCAT–52RG–63Wire TypeQuantityCAT–53RG–63Wire Receiver/CableModem/Hi–speedDataWire Type2QuantityCAT–52RG–6Wire Type2QuantityCAT–53RG–63Telephone and Video Camera Pre-wire SchemeRecommended Color Coding for Category 5/5E WireCategory 5/5E Wire marc and GatewayFor pre-wiring telephone modules, use one gray CAT-5/5E cable from each telephone and modem location,web television and/or satellite box location, and telephone demarcation point (the interface from thetelephone service provider).For pre-wiring video camera modules, use one red CAT-5/5E cable from each video camera location (forexample, front door) and security panel location.Audio/Video and Television Pre-wire SchemeRecommended Color Coding for Coaxial WireRG-6 Coaxial Wire ColorUsageWhiteUse as send, upstream, or internal cable from modulators to distribution panelBlackUse as receive, downstream, or external cable from distribution panel to televisionsFor pre-wiring audio/video and television modules, use RG-6 coaxial cable. Use black coaxial cable foreach television and computer location.Use white coaxial cable for each location where one or more video sources are located, the CATVdemarcation point (the interface from the television service provider), and off-air antennas.For satellite dish locations, use two white coaxial cables to the distribution panel. For each satellitereceiver location, use one white coaxial cable to the distribution panel. If HDTV satellite dishes areinstalled, four coaxial cables may be required because the satellite systems can accommodate up to fourdifferent receivers from a single dish.04/03 2001–2003 Schneider Electric All Rights Reserved7Section 2–Wiring GuideRECOMMENDED PRE-WIRE SCHEMES

Wiring Guidewww.squared.com/multilinkInstalling and Terminating the CableSection 2–Wiring GuideData Pre-wire SchemeFor pre-wiring data modules, use one blue CAT-5/5E cable from each computer location, room with aseparate peripheral (such as a laser printer), and room where access to the network is needed.Wiring a Telephone Wall PlateTo wire a telephone wall plate, refer to the following table.NOTE: The wiring method shown in the table below requires the use of two-line telephones.Telephone Wall Plate Wiring Using Two Six-Position, Four-Conductor Jacks (RJ-14)Cable ColorPin NumberConnector Color (As Marked on RJ-14 Modular Connector)White/OrangePin 2White/OrangeBluePin 3BlueWhite/BluePin 4White/BlueOrangePin 5OrangeJack 1: Pairs 1 and 2Jack 2: Pairs 3 and 4White/BrownPin 2White/OrangeGreenPin 3BlueWhite/GreenPin 4White/BlueBrownPin 5OrangeWhen a fax machine is present or single-line telephones are used, wire line 1 (blue, blue/white pair) tothe center pins (marked blue, blue/white) on the RJ-14 jack.For access to a second line for a fax machine or to enable single-line telephone use, wire line 2 (orange,orange/white pair) to the center pins (marked blue, blue/white) on a second RJ-14 jack.INSTALLING AND TERMINATING THE CABLE110 Punch-Down ConnectorsThe 110 punch-down connector is an insulation displacement connection system typically included oncombination telephone/video hubs, telephone hubs, and data hubs.The CAT-5/5E wires are inserted into the connectors. To push wire into the connector, use only a110 punch-down tool. When wiring the connector, keep the wire cable sheath close to the connector anddo not untwist the wire more than 1/2 in. (13 mm).110 punch-down toolCAT-5/5E cable8 2001–2003 Schneider Electric All Rights Reserved04/03

www.squared.com/multilinkWiring GuideInstalling and Terminating the CableModular connectors are attached to each end of a CAT-5/5E jumper cable. Modular connectors are usedwith television, telephone, data, and Ethernet hubs.There are three six-position connector types, depending on the number and usage of lines.Eight-position connectors are used with the telephone expansion hub (model SDM48PX). For residentialpurposes, it is recommended that the eight-position connectors (RJ-45) are wired to the T568-Awiring standard.Refer to the table below for the modular connector type and the figures below for wiring configurations.Modular Connector TypesLine UsageConnector TypeSix-position ConnectorsSingle-line telephones, answering machines, and modems (six-position, two-conductor)RJ-11Dual-line telephones and answering machines (six-position, four-conductor)RJ-14Three-line key service unit (six-position, six-conductor)RJ-25Eight-position ConnectorsTelephones, Ethernet (10 Base-T and 100 Base-T), and data lines (eight-position, eight-conductor)04/03 2001–2003 Schneider Electric All Rights ReservedRJ-459Section 2–Wiring GuideModular Connectors

Wiring Guidewww.squared.com/multilinkInstalling and Terminating the CableSection 2–Wiring GuideWiring a Modular ConnectorThe illustrations below show the modular connectors positioned with the tabs down, pins up, and theopenings facing toward you.Pair 3Pair 3 Pair 2 Pair 4Pair 1Pair 2Pair 2Pair 1Pair 1RTT RT R1 2 3 4 5 61 2 3 4 5 6RJ-11 ConnectorRJ-14 ConnectorPair1T T R T RRT R T R T RT RRJ-25 ConnectorRJ-45 Connector(T568-A standard)1 2 3 4 5 61 2345678Wiring a Modular JackTo wire a modular jack with CAT-5/5E wiring, follow the wire color code for the TIA/EIA-568-A wiring standardas illustrated for the RJ-45 modular connector. Position the first pair of wires to the terminals closest to theend of the jack. Do not untwist the pairs more than 1/2 in. (13 mm) from the termination point. Push the wiresinto the terminals of the jack using a 110 punch-down tool and trim. After all pairs are connected, snap onstrain relief caps.110 punch-down tool10Strain relief caps 2001–2003 Schneider Electric All Rights Reserved04/03

www.squared.com/multilinkWiring GuideRecommended Product ConfigurationsSection 2–Wiring GuideRECOMMENDED PRODUCT CONFIGURATIONSThe following product configurations are guides for installing a structured wiring system for the mostcommon applications.Basic Home Distributes two telephone lines to six locations and one cable input to four locations Handles multiple telephone lines for voice, fax and Internet accessCatalog NumberDescriptionSDM18BW18 In. (457.2 mm) EnclosureSDM18CW18 In. (457.2 mm) CoverSDM26P14VCombination Telephone/Video HubIncoming RG-6 coaxial cablefrom cable company or localantennaRG-6 coaxialcables connectedto four televisionwall platesOUTINOUTININOUTOUTINOUTIN532-230 5MHzto esR2TR1TCombo Hub (2 lines x 6 phones, 1inpu t x 4 televisions)Square D model SDM26P14VIncomingtelephone service(two lines)Internal telephone cablesconnected to six telephonewall plates (CAT–5/5Eunshielded twisted pairs).Each cable can have two tofour pairs of wire.CAT-5/5E cable04/03 2001–2003 Schneider Electric All Rights Reserved11

Wiring Guidewww.squared.com/multilinkRecommended Product ConfigurationsSection 2–Wiring GuideBasic Home Office Distributes four telephone lines to six locations and one cable input to four locations Allows sharing of files and peripherals among two computers Handles multiple telephone lines for voice, fax, and Internet accessCatalog NumberDescriptionSDM18BW18 In. (457.2 mm) EnclosureSDM18CW18 In. (457.2 mm) CoverSDM8DEight-Port Data HubSDM46P14VCombination Telephone/Video HubIncoming RG-6 coaxialcable from cable companyor local antennaRG-6 coaxial cablesconnected to fourtelevision wall platesOUTINOUTININOUTOUTINOUTIN532-230 5MHzto 1000MHzCOMBINERFrom TelcoSDM46P14VRTelephones4 RTR3 RTRR2 TTRR1TTCombo Hub (2 lines x 6 phones, 1 inpu t x 4 televisions)Square D model SDM46P14VInternal telephone cables connected to six telephonewall plates (CAT-5/5E unshielded twisted pairs). Eachcable can have two to four pairs of wire.Incoming telephoneservice (four lines)CAT-5/5E cableData Hub ( 8 cables, TIA-568A)Category 5 CompliantSquare D model SDM8DSDM8DCAT-5/5E cableCables connecting to datajacks in eight wall platesUp to eight data jacks can be wired using this equipment. However, unless an Ethernet hub is used, onlytwo computers can be networked by connecting two RJ-45 jacks with a patch cord on the data hub.NOTE: To allow two computers to be networked, one crossover patch cord must be used somewhere inthe system, i.e., between one computer and data outlet.12 2001–2003 Schneider Electric All Rights Reserved04/03

www.squared.com/multilinkWiring GuideIf high-speed Internet service will be brought to the home over the telephone lines (DSL), the incomingtelephone line should be connected to the combination hub (model SDM46P14V) and then jumped to thedata hub (model SDM8D) as shown in the figure below. In this scenario, one computer can have DSLservice. The high-speed Internet line can easily be moved to another computer by changing thelocation of the jumper on the SDM8D.Incoming RG-6 coaxial cable fromcable company or local antennaRG-6 coaxial cables connectedto four television wall platesOUTINOUTININOUTINOUTOUTIN532-230 5MHzto 1000MHzSPLITTERFrom TelcoSDM46P14VRCOMBINERTelephones4 RTR3 RTRR2 TTRR1TCombo Hub (2 lines x 6 phones, 1inpu t x 4 televisions)Square D model SDM46P14VInternal telephone cables connected to fivetelephone wall plates (CAT-5/5E unshieldedtwisted pairs). Each cable can have two tofour pairs of wire.Incoming telephoneservice (four lines)Sends DSL to officeData Hub ( 8 cables, TIA-568A)Category 5 CompliantSquare D model SDM8DDSL ModemSDM8DCables connecting to datajacks in six wall platesTo data jack in home office04/03 2001–2003 Schneider Electric All Rights Reserved13Section 2–Wiring GuideRecommended Product Configurations

Wiring Guidewww.squared.com/multilinkRecommended Product ConfigurationsSection 2–Wiring GuideAdvanced Home Office Distributes four telephone lines to six locations Creates a LAN by connecting up to five computers or peripherals through the Ethernet hub(model SDM5DE) Allows a high-speed Internet connection to be shared among computers Distributes CATV or antenna signals to up to eight televisionsCatalog NumberDescriptionSDM18BW18 In. (457.2 mm) EnclosureSDM18CW18 In. (457.2 mm) CoverSDM4ACFour-Outlet AC Accessory (Two Plugs)SDM46PPhone BoardSDM8DEight-Port Data HubSDM5DEEthernet HubSDM38VBIR or SDM38VHIRVideo HubFive rooms have ethernet connectionsData Hub ( 8 cables, TIA-568A)Category5 CompliantSquare D model SDM8DSDM8DPower supply-included(model SDM350087) CAT-5/5E patchcords (modelsto SDM4ACSDM1DC or SDM2DC)CAT-5 cableTo data jacksin remotewall platesEthernetHub 10 BASE-T (5 RJ-45 inputs, 1 uplink)Square D model SDM5DE1234Col.5PwrLink/Act.SDM5DEUp link54321 5VDCLED glows whenpower is appliedAntenna orcable(model SDM38VHIR)Cable only(model SDM38VBIR)IRGnd 12vdcPower supply-included(model SDM350086) to SDM4ACAdapter (included)B PwrModulatorsTelevisionsSDM38VBIRAUp to eight televisionsRG-6 coaxial cable14 2001–2003 Schneider Electric All Rights Reserved04/03

www.squared.com/multilinkWiring GuideNOTES: If high-speed Internet service is brought to the home over the telephone lines (DSL), the incomingtelephone line should be connected to the SDM46P and then jumped to the SDM8D through the DSL modem(as shown in the figure below).If the Internet service provider (ISP) allows multiple IP addresses to be leased to one modem, then thehigh-speed Internet service may be available to all the computers in the home using the Multi-LinkEthernet Hub. In this situation, the high-speed Internet line will jump from the SDM8D to the “uplink” port inthe SDM5DE. All the computers connected to the Ethernet hub must have firewall software or hardwareinstalled since they all will have access to the high-speed line at the same time.If the ISP does not allow multiple IP addresses to be leased to one modem, then replace the Multi-LinkEthernet Hub in the figure below with a router (purchased separately).Security system connection(RJ-31X only)Telephone Master Hub (4 lines x 6 phones)Square D model TR1T4SDM46P3OutFour lines from telephonecompany (CAT-5/5E, fourunshielded twisted pairs)Five rooms have ethernet connectionsData Hub ( 8 cables, TIA-568A)Category 5 CompliantSquare D model SDM8DSDM8DDSL ModemPower supply-included(model SDM350087)to SDM4ACCAT-5 cableTo data jacksin remotewall platesEthernet1234Hub 10 BASE-T (5 RJ-45 inputs, 1 uplink)Square D model SDM5DECol.5PwrLink/Act.SDM5DEUp link54321 5VDC04/03 2001–2003 Schneider Electric All Rights Reserved15Section 2–Wiring GuideRecommended Product Configurations

Wiring Guidewww.squared.com/multilinkRecommended Product ConfigurationsSection 2–Wiring GuideAdvanced Video and Security Camera Distributes four telephone lines to six locations Creates a local channel for viewing a camera signal Distributes camera signal along with the cable television or antenna signals to up to eight televisions No power is necessary at the camera, it is powered through the channel injector Multiple cameras can be added to the system (a channel injector is needed for each one)Catalog NumberDescriptionSDM18BW18 In. (457.2 mm) EnclosureSDM18CW18 In. (457.2 mm) CoverSDM4ACFour-Outlet AC Accessory (Two Plugs)SDM46PPhone BoardSDM38VBIRVideo HubSDM1VCBlack and White CameraSDM11VMB or SDM11VMHChannel InjectorPower supply-included(model SDM350079) tomodel SDM4ACSDM11VMBorSDM11VMHMake all cables and CAT-5 connections first. Power thechannel injector last.Connect antenna or incoming cable to channel injector(model SDM11VMH) CATV/Ant input or the CATV tomodel SDM11VMB.RG-6 coaxial cableCAT-5/5E cableVideo camera-rear view(model SDM1VC)SDM1VCPower supply-included(model SDM350086) to SDM4ACSDM38VBIRLED glows whenpower is appliedIRGnd 12vdcAdapter (included)B PwrModulatorsTelevisionsAUp to eight televisionsRG-6 coaxial cable16 2001–2003 Schneider Electric All Rights Reserved04/03

www.squared.com/multilinkWiring GuideRecommended Product Configurations Distributes four telephone lines to six locationsCreates a local channel for viewing a camera signalDistributes camera signal along with the cable television or antenna signals to up to eight televisionsNo power is necessary at the camera, it is powered through the channel injectorMultiple cameras can be added to the system (channel injectors can be cascaded)Video sources, such as DVD players, are connected via line level inputs to the set top modulator(model SDM41VTST)Set top modulator modulates all the inputs and combines them onto a single coaxial cable for distributionback to the video hubOutput of the set top modulator is connected to port B of the video hub, which allows the video hub to bepowered via the set top modulatorNOTE: Port A on the video hub is also used to connect modulated signals, however, no IR control can bepassed through this portCable or antenna signal is connected to the model SDM11VMBIR targets are connected in-line with each television where IR control is desiredIR emitters are connected to the set top modulator and position over the IR sensor on the videosource deviceCatalog NumberDescriptionSDM18BW18 In. (457.2 mm) EnclosureSDM18CW18 In. (457.2 mm) CoverSDM4ACFour-Outlet AC Accessory (Two Plugs)SDM46PPhone BoardSDM38VBIR or SDM38VHIRVideo HubSDM41VTST4-Input Set Top ModulatorSDM2VCCColor CameraSDM11VMB or SDM11VMHChannel InjectorSDM1VIRIR TargetSDM2VIRIR EmitterFor satellite applications, see pages 41–43.04/03 2001–2003 Schneider Electric All Rights Reserved17Section 2–Wiring GuideMedia Center and Security Camera

Wiring Guidewww.squared.com/multilinkSection 2–Wiring GuideRecommended Product ConfigurationsNote: The satellite dish and receiver, CCTV Camera,VCR, and DVD shown are not Square DMulti-Link products.Satellite dish and receiverVideo/audio outputsCCTV Camera at front doorTerminating jumpers(on side of unit)A BC DPower connectionOUTPUTRCA "Y" adapter to localmonitor or DolbyPro-Logic systemA BC DCH BCH DSDM41VTRemove jumper for Hi-Z(See manual)CH ACH Optional IR emitter (modelSDM2VIR) repeats what theIR target “sees” in the other room.Attach the IR emitterdirectly over the IR sensor.Video/audio outputsUse only shielded75 ohm coaxialcableVCR12:00VCRDVDRG-6 coaxial preferredPower option-Do not power. Poweris obtained through port Bof set top modulator.To more televisionsOptional IR target (modelSDM1VIR) may be used atany or all televison locations.SDM38VHIR orSDM38VBIRControl the DVD,DSS, or VCRfrom any room.RG-6 coaxial cablePower supply-included(model SDM350079) tomodel SDM4ACSDM11VMBorSDM11VMHCAT-5/5E cableMake all cables and CAT-5 connections first. Power thechannel injector last.Connect antenna or incoming cable to channel injector(model SDM11VMH) CATV/Ant input or the CATV tomodel SDM11VMB.Security system connection(RJ-31X only)Video camera-rear viewTelephone Master Hub (4 lines x 6 phones)Square D model RJ31X3SDM1VCOutFour lines from telephone company(CAT-5/5E, four unshielded twisted pairs)SDM46P18 2001–2003 Schneider Electric All Rights ReservedInternaltelephone cableconnected to sixtelephone wallplates (CAT-5/5Eunshieldedtwisted pairs).Each cable canhave two to fourpairs of wire.04/03

www.squared.com/multilinkEnclosures and BracketsProduct DescriptionENCLOSURESAND BRACKETSThe enclosures are the housing components of the Square D Multi-Link Structured Wiring System. Eachenclosure has a mounting grid, allowing any structured wiring module to easily mount into the enclosure.Modules can be mounted on either side of the grid and upside down.The universal mounting bracket (model SDM10BW) can be surface mounted over a single- ordouble-gang box or mud ring. Any Square D Multi-Link Structured Wiring module can be installed onto themounting bracket. To give the bracket a finished look, a snap-on cover (model SDM10CW) is available.Universal Mounting Bracket (Model SDM10BW)Features: 10 in. (254 mm) high, 6.5 in. (165 mm) wide, .35 in. (9 mm) deep 10 in. (254 mm) of grid mounting space Vertical or horizontal mounting Surface mount over single- or double-gang openings Optional cover (model SDM10CW) Painted steel, whiteSDM10BWSDM10BW With Modules InstalledCover (Model SDM10CW)Features: 11 in. (279 mm) high, 6.7 in. (170 mm) wide, 4.5 in. (114 mm) deep Snap-on cover design Painted steel, white04/03 2001–2003 Schneider Electric All Rights Reserved19Section 3–Enclosures andBracketsPRODUCT DESCRIPTION

Enclosures and Bracketswww.squared.com/multilinkProduct DescriptionEnclosures (Models SDM18BW and SDM36BW)Section 3–Enclosures andBracketsFeatures: Model SDM18BW is 18 in. (457.2 mm) high, 14.25 in. (362 mm) wide, and3.5 in. (89 mm) deep, with 34 in. (864 mm) of grid mounting space Model SDM18BW has two columns of grid mounting space, each columnis 17 in. (432 mm) Model SDM36BW is 36 in. (914.4 mm) high,

Section 2–Wiring Guide Wiring a Modular Connector The illustrations below show the modular connectors positioned with the tabs down, pins up, and the openings facing toward you. Wiring a Modular Jack To wire a modular jack with CAT-5/5E wiring, follow the wire color co